Audi 100

1982-1990 of release

Repair and operation of the car



Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   - 10.13. Parking brake
      10.13.1. Adjustment of the parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment


10.13. Parking brake
GENERAL INFORMATION

Parking brake
1 – longitudinal lever of a back suspension bracket;
2 – clip;
3 – adjusting nut;
4 – equalizer;
5 – protective cover;
6 – arm;
7 – axis;
8 – lock ring;
9 – switch of a control lamp of the parking brake;
10 – gear sector;
11 – doggie;
12 – draft;
 13 – spring;
14 – button;
15 – handle;
16 – forelock;
17 – casing;
18 – axis;
19 – draft of the equalizer;
20 – plug;
21 – lock ring;
22 – holder;
23 – sealant;
24 – cable;
25 – lever

Replacement of a cable of the drive of the parking brake (model with back drum brake mechanisms)

PERFORMANCE ORDER
1. To establish basic whetstones under forward wheels.
2. To weaken an inhaling of bolts of fastening of a back wheel.
3. To raise and establish back part of the car on support.
4. To remove a wheel.
5. To remove a back brake shoe and to disconnect a cable tip from the driving lever (see rice. Drum brake mechanism of a back wheel).
6. To weaken an adjusting nut and to disconnect a cable from the equalizer.
7. To disconnect the holder from the longitudinal lever and to remove a cable, having taken out a sealant from the longitudinal lever.
8. To establish a new cable upside-down.
9. After installation to adjust the parking brake.