Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and installation of a cowl
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement lokarya
   11.6. Forward wing
   11.7. Replacement of a molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and installation of a door
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation of a window regulator with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of the reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and installation of a heater
+ 12. Electric equipment










11.15. Removal and installation of a window regulator with the electric drive

GENERAL INFORMATION

Window regulator details with the electric drive

1 – block of the relay and safety locks;
2 – additional block;
3 – thermosafety lock (20 A);
4 – socket;
5 – the switch on a door from the passenger;
6 – control unit window regulator;
7 – arm;
8 – the switch on a door from the driver;
9 – the switch blocking back doors;
10 – door glass from the driver;
11 – the window regulator electric motor socket from the driver;

12 – door switch;
13 – glass fastening elements;
14 – screw;
15 – window regulator electric motor;
16 – internal panel of a door;
17 – washer;
18 – nut;
19 – demountable connection at the left under the dashboard;
20 – plait of wires;
21 – screw;
22 – the wire connected to "weight" (contact "And")


PERFORMANCE ORDER
1. To remove a door upholstery.
2. To lower glass so that to get access to fastening of a holder of glass to the ram. To record glass in this situation by a wooden wedge.
3. To disconnect the window regulator ram from a glass holder.
4. To turn off nuts of fastening of the mechanism of a window regulator and screws of fastening directing a window regulator.
5. To disconnect a block with window regulator wires from a plait of wires, having shifted it back.
6. To take out a window regulator through the lower assembly opening in the door panel.
7. To establish a window regulator upside-down.
8. Adjustment of the top limiter requires a special key therefore adjustment is recommended to be carried out at service station.