Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and installation of a cowl
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement lokarya
   11.6. Forward wing
   11.7. Replacement of a molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and installation of a door
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation of a window regulator with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of the reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and installation of a heater
+ 12. Electric equipment










11.17. Replacement of the reflecting element of an external rear-view mirror

GENERAL INFORMATION

Replacement of reflecting mirror element with the mechanical drive

1 – case;

2 – adjusting ram;

3 – the reflecting element;

4 – spring;

5 – latch


PERFORMANCE ORDER
Manual drive
1. To hook from below a plastic or wooden shovel and by means of a firm plastic wedge or a narrow screw-driver to turn the reflecting mirror element towards a door.
2. To disconnect a spring from the reflecting element.
3. To draw in clamp latch clips down and to remove the reflecting element from the adjusting mechanism.
4. To establish the reflecting element in a latch.
5. To connect a spring to the reflecting element.
6. To turn the reflecting element in former situation and carefully to press it on a spherical finger, making effort only for the central part of an element.
The electric drive with the tokoobogrevy
7. To turn through an assembly opening from below cases (1) mirror a lock ring (2) in the direction to the car, rasfiksirovav thereby the reflecting element.
8. To take out carefully reflecting element, having disconnected from it heating system wires.
9. To connect to the reflecting heating system wire element.
10. To insert the reflecting element into the case of a mirror and to record it a lock ring. Thus the pin on a lock ring has to be in the middle of an assembly opening.