Audi 100

1982-1990 of release

Repair and operation of the car

Каталог лепнины из полиуретана, молдинги из полиуретана | Наши рекомендации :

Я немного офигела, достала телефон когда загорала на пляже, рядом со мной пацан дрочит член https://tnt-porno.ru/cat24 даже не прерываясь..

11.9. A door upholstery (release cars till December, 1987)

GENERAL INFORMATION

Forward door

1 – button of blocking of the lock;

2 – socket of the internal handle of the lock of a door;

3 – hand-rail;

4 – window regulator handle;

5 – internal upholstery

Removal

PERFORMANCE ORDER

1. To remove an internal overlay of a rear-view mirror.
2. To unscrew the button of blocking of the lock of a door.
3. To unscrew the button of blocking of the lock of a door.
4. To remove a cap of the screw by means of a screw-driver and, having turned out the fastening screw, to remove the socket of the internal handle of the lock of a door.
5. To remove a decorative overlay of a hand-rail, having picked up it a screw-driver, to turn out screws of fastening and to remove a hand-rail.
6. To remove the window regulator handle. For this purpose to wring out down an overlay of the handle and to turn out the screw of fastening of the handle.
7. To turn out on one screw of lateral top fastening from both parties of an upholstery.
8. To turn out the screw of the central fastening of an upholstery located under the internal handle.
9. To wring out percussion caps of the lower fastening by means of a screw-driver and to remove an upholstery up.
10. If necessary to remove a protective film, previously having taken out three top percussion caps of its fastening.

Installation

PERFORMANCE ORDER

1. To establish if acted, a protective film, having fixed it from above percussion caps. To replace the damaged film.

2. To establish an upholstery and to latch all lower percussion caps of its fastening.

3. To screw the screw of the central fastening of an upholstery.

4. To screw on one screw of lateral top fastening from both parties of an upholstery.

5. To install the window regulator handle.

6. To establish a hand-rail, to screw screws of its fastening and to insert a decorative slip.

7. To install the socket of the internal handle of the lock of a door.

8. To wrap the button of blocking of the lock.

9. To establish an internal overlay of a rear-view mirror.