Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
- 1.1. Governing bodies and devices
   + 1.1.1. Release models till January, 1988
   + 1.1.2. Release models since January, 1988
   1.2. Window regulators with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. Internal rear-view mirror
   1.5. Cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   - 1.9. Start of the engine
      1.9.1. Carburetor engine
      1.9.2. The engine with system of injection of fuel
      1.9.3. Diesel engine
   1.10. Precautionary measures at an engine stop
   1.11. Cruise control
   1.12. Heating and ventilation
   1.13. Control panel conditioner
   1.14. On-board computer
   1.15. Control of the on-board computer on release models till January, 1988.
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Car running in
   1.18. Check of the car before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985.
   + 1.21. Servicing of cars of release since August, 1985.
   1.22. Frequency of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


1.9.2. The engine with system of injection of fuel

PERFORMANCE ORDER
1. To include ignition.
2. To include a starter, without pressing an accelerator pedal.
3. If the engine was not started during 10 with, to stop start. Repeatedly it is possible to launch the engine approximately through 30 pages.
4. If the engine was not launched from three attempts, it is necessary to find and eliminate malfunction. Most likely, burn-out of safety locks of the fuel pump or failure of the most fuel pump is the reason of it.
5. After start-up of the hot engine during its unstable work slightly to press an accelerator pedal.
6. At start-up of the engine of the MS model during start-up it is necessary to press an accelerator pedal slightly.