Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
- 3. Engines
   - 3.1. Four-cylinder engines
      3.1.1. Removal and installation of the engine
      - 3.1.2. Dismantling and assembly of the engine
         3.1.2.1. Removal and installation of a head of the block of cylinders
         3.1.2.2. Removal of a camshaft and pushers of valves
         3.1.2.3. Survey of a camshaft
         3.1.2.4. Definition of technical condition of hydropushers of valves
         3.1.2.5. Installation of a camshaft and pushers of valves
         3.1.2.6. Removal and installation of valves (dismantling of a head of the block)
         3.1.2.7. Survey, troubleshooting and repair of details of a head of the block of cylinders
         3.1.2.8. Gaps between cams of a cam-shaft and pushers of valves
         3.1.2.9. Camshaft drive
         3.1.2.10. Removal and installation of an intermediate shaft
         3.1.2.11. Removal and installation of a flywheel
         3.1.2.12. Replacement of epiploons of a cranked shaft
         3.1.2.13. Removal and installation of an oil case
         3.1.2.14. Removal, check and installation of the oil pump
         3.1.2.15. Dismantling of shatunno-piston group
         3.1.2.16. Survey and check of details of shatunno-piston group
         3.1.2.17. Assembly of shatunno-piston group
         3.1.2.18. Removal, survey and installation of a cranked shaft
   + 3.2. Five-cylinder engines
   + 3.3. Diesel engine
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










3.1.2.13. Removal and installation of an oil case

PERFORMANCE ORDER
1. To merge oil from an engine case.
2. To remove the pallet closing a transmission.
3. To establish a jack under a beam of a forward suspension bracket.
4. To turn off forward bolts of fastening of a beam of a forward suspension bracket and slightly to lower it a jack.
5. To turn off bolts of fastening and to remove a case.
6. To establish a case upside-down. Thus to replace laying of a case and to establish it without sealant use. To tighten bolts of fastening of a case evenly the moment of 20 N · m (2,0 kgfs · м).