Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   - 6.1. Power supply system of carburetor engines
      6.1.1. Replacement of the filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Check of a temperature regulator
      6.1.4. Valve check of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of the drive of an accelerator
      6.1.8. Adjustment of a cable of the drive of an accelerator
      6.1.9. Replacement of the fuel level sensor
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin purification of fuel
      6.1.12. Removal and installation of the carburetor
      + 6.1.13. Dismantling and assembly of the carburetor
      + 6.1.14. Adjustments of the Pierburg 1B3 carburetor
      + 6.1.15. Adjustments of the Pierburg 2E2 carburetor
      + 6.1.16. Adjustments of the Keihin carburetor
   + 6.2. A power supply system of engines with fuel injection
   + 6.3. Power supply system of the diesel engine
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










6.1.10. Removal and installation of a fuel tank

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the battery.
2. To pump out the fuel remains from a tank.
3. To disconnect from the sensor (see rice. A power supply system of the engine with a capacity of 1,8 l) hoses and wires (see subitem 2-4 of subsection 6.1.9.).
4. To disconnect a tube and a hose from a jellied mouth.
5. To open the hatch of a jellied mouth of a fuel tank and to unscrew the screw of fastening of a jellied mouth. To weaken a collar, to take out a jellied pipe.
6. To raise and establish back part of the car on support.
7. To disconnect collars of fastening of a fuel tank and to lower a tank.
8. To establish a fuel tank upside-down.