Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   + 6.1. Power supply system of carburetor engines
   - 6.2. A power supply system of engines with fuel injection
      6.2.1. Replacement of the filtering element of the air filter
      6.2.2. Removal and installation of the air filter
      6.2.3. Replacement of the fuel filter
      6.2.4. Removal and installation of the distributor of fuel
      6.2.5. Dismantling and assembly of the reducing valve
      6.2.6. Removal and installation of the fuel accumulator
      6.2.7. Removal and installation of fuel nozzles
      6.2.8. Removal and installation of a turbocompressor
      6.2.9. Removal and installation of a fuel tank
      6.2.10. Removal and installation of the fuel pump
      6.2.11. Check of a temperature regulator
      6.2.12. Adjustment of idling of the engine
      6.2.13. Check of a starting nozzle
      6.2.14. Check of the regulator of pressure
      6.2.15. Check and adjustment of provision of a plate of the measuring instrument of a consumption of air
   + 6.3. Power supply system of the diesel engine
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


6.2. A power supply system of engines with fuel injection

6.2.1. Replacement of the filtering element of the air filter

GENERAL INFORMATION

Details of the air filter

1 – screw collar;
2 – hose of supply of warm air;
3. – hose of supply of cold air;
4 – pipe of supply of cold air;
5 – tightening collar;
6 – the filtering element;
7 – filter case;
8 – braking valve engine;
9 – fuel distributor;
10 – branch pipe;
11 – hose;
12 – a hose from the filter to the idling stabilizer;
13 – filter cover;
14 – thermostat;
15 – temperature regulator

PERFORMANCE ORDER
1. To weaken a collar and to remove a pipe.
2. To unfasten spring clips of fastening of a cover and to remove it with the filtering element.
3. To take out an element from a cover.
4. To wipe the case and a cover of the filter from dust and dirt.
5. To insert the new filtering element into a cover.
6. To establish into place a cover and to connect to it a pipe.