Audi 100

1982-1990 of release

Repair and operation of the car

Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical drive of switching off of coupling
   - 7.3. Hydraulic drive
      7.3.1. Main cylinder of the drive of coupling
      7.3.2. Working cylinder of the drive of coupling
      7.3.3. The coupling switching off bearing (release models after 1988)
      7.3.4. Pumping of system of the drive of switching off of coupling
   + 7.4. Transmission
   + 7.5. Drive of forward wheels
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

7.3.3. The coupling switching off bearing (release models after 1988)

GENERAL INFORMATION

The device of a fork of switching off of coupling on models since 1988.

1 – coupling case;
2 – spherical finger;
3 – holder;
4 – washer;
5 – sealing ring;

6 – epiploon;
7 – the directing plug;
8 – spring clip;
9 – coupling switching off fork;
10 – coupling switching off bearing

Replacement

PERFORMANCE ORDER

1. To remove a transmission.

2. To remove by means of a screw-driver a spring clip of fastening of the holder to a spherical finger.

3. To remove a fork of switching off of coupling with the bearing from the directing plug.

4. To remove the holder from a fork.

5. To take out the bearing from a fork.

6. To implant the holder's finger into a fork.

7. To grease basic surfaces of a fork with graphite greasing and to establish a fork on the directing plug. Thus the holder to establish on a spherical finger.

8. To establish a spring clip, having recorded the holder on a spherical finger.

9. To bring the bearing of switching off of coupling to a fork at an angle 45 °. Then to establish it on the directing plug.