Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical drive of switching off of coupling
   + 7.3. Hydraulic drive
   + 7.4. Transmission
   - 7.5. Drive of forward wheels
      7.5.1. Half shaft
      7.5.2. Internal hinge of equal angular speeds (HEAS)
      7.5.3. External hinge of equal angular speeds (HEAS)
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










7.5.3. External hinge of equal angular speeds (HEAS)

Removal

PERFORMANCE ORDER
1. To remove a half shaft from the car (see subsection 7.5).
2. To remove coupling collars 8 and to shift from the case of the external hinge an antisplash cover 11.
3. To unclench for short moustaches a lock ring 10 and to press the external CV JOINT from a half shaft, making effort for a holder.
4. To remove an antisplash cover 11.

Installation

PERFORMANCE ORDER
1. To remove old lubricant.
2. To put in the hinge 90 g (models with 4-cylinder engines) or 120 g (models with 5-cylinder engines) jellied greasing of the G6 type or domestic SHRUS-4 greasing.
3. To establish on a half shaft an antisplash cover 11.
4. To Napressovat the hinge assembled on a half shaft so that the lock ring 10 was latched in a half shaft flute.
5. To establish new collars 8 and to press out on them locks.
6. To establish a half shaft on the car.