Audi 100

1982-1990 of release

Repair and operation of the car

Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
- 8. Running gear
   - 8.1. Forward suspension bracket
      8.1.1. Telescopic rack
      8.1.2. Replacement of the shock-absorber
      8.1.3. Removal and installation of the stabilizer of cross stability
      8.1.4. Nave of a forward wheel
   + 8.2. Back suspension bracket
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.1.4. Nave of a forward wheel

Dismantling and assembly

PERFORMANCE ORDER

1. To remove a telescopic rack (see subsection 8.1.1).

2. To turn off bolts of fastening and to remove a brake board.

3. To Vypressovat by means of a stripper a wheel nave from the bearing installed in a rotary fist.

4. To remove on one lock ring from both parties of a rotary fist.

5. To Vypressovat the nave bearing from a rotary fist.

6. To collect a nave upside-down. At a bearing press fitting on a nave flange effort to apply only on an internal ring of the bearing. To tighten bolts of fastening of a brake board the moment of 10 N · m (1,0 kgfs · м). After assembly to establish a telescopic rack into place.