Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1. System of electric equipment
      12.1.1. Technical characteristics
      12.1.2. Safety locks, relay and control units
      - 12.1.3. Generator
         12.1.3.1. Removal and installation of the generator
         12.1.3.2. Dismantling and assembly of the generator
         12.1.3.3. Check, survey and troubleshooting of details of the generator
         12.1.3.4. Adjustment of a tension of a belt of the drive of the generator
      + 12.1.4. Starter
      + 12.1.5. Lighting and light alarm system
   + 12.2. System of ignition
   + 12.3. Electric circuits


12.1.3.1. Removal and installation of the generator

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the battery.
2. To disconnect electric wires from generator plugs, previously having marked them.
3. To weaken an inhaling of bolts of fastening of the generator to an arm and an adjusting level and a bolt of fastening of an adjusting level.
4. To turn the generator to the engine block to weaken a belt tension.
5. To take off a generator belt.
6. To turn off bolts of the top and lower fastening of the generator.
7. To remove the generator.
8. To install the generator upside-down. After that to adjust a drive belt tension (see subsection 12.1.3.4). To tighten bolts of fastening of an adjusting level and the generator to an adjusting level the moment of 20 N · m (2,0 kgfs · l), and a bolt of fastening of the generator to an arm the moment of 30 N · m (3,0 kgfs · м).