Audi 100

1982-1990 of release

Repair and operation of the car

Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical drive of switching off of coupling
   - 7.3. Hydraulic drive
      7.3.1. Main cylinder of the drive of coupling
      7.3.2. Working cylinder of the drive of coupling
      7.3.3. The coupling switching off bearing (release models after 1988)
      7.3.4. Pumping of system of the drive of switching off of coupling
   + 7.4. Transmission
   + 7.5. Drive of forward wheels
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

7.3.4. Pumping of system of the drive of switching off of coupling

PERFORMANCE ORDER

1. To add in a tank (see rice. Coupling with the hydraulic drive) fresh brake fluid.

2. To remove a protective cap from the valve of pumping of the working cylinder.

3. To put on a pumping hose the valve. To lower other end of a hose in capacity with a small amount of brake fluid so that it was in liquid.

4. Several times to press a pedal of coupling and to hold it in the pressed situation.

5. To open the pumping valve for production of air from system. Availability of air in system is determined by emergence of bubbles in capacity.

6. To close the pumping valve.

7. To repeat the actions described in subitem 4-6 until vials of air in capacity cease to appear.

8. To remove a hose from the valve of pumping and to put on a cap.

9. To add pure brake fluid in a tank.

10. To check and if necessary to adjust a free wheeling of a pedal of coupling (see subsection 7.2.2 or subitem 1-3 of subsection 7.3.1).