Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   - 6.1. Power supply system of carburetor engines
      6.1.1. Replacement of the filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Check of a temperature regulator
      6.1.4. Valve check of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of the drive of an accelerator
      6.1.8. Adjustment of a cable of the drive of an accelerator
      6.1.9. Replacement of the fuel level sensor
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin purification of fuel
      6.1.12. Removal and installation of the carburetor
      + 6.1.13. Dismantling and assembly of the carburetor
      - 6.1.14. Adjustments of the Pierburg 1B3 carburetor
         6.1.14.1. Adjustment of frequency of rotation of start-up of the engine
         6.1.14.2. Adjustment of starting gaps of the air gate
         6.1.14.3. Adjustment of a priotkryvaniye of a butterfly valve
         6.1.14.4. Adjustment of the accelerating pump
         6.1.14.5. Idling adjustment
      + 6.1.15. Adjustments of the Pierburg 2E2 carburetor
      + 6.1.16. Adjustments of the Keihin carburetor
   + 6.2. A power supply system of engines with fuel injection
   + 6.3. Power supply system of the diesel engine
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










6.1.14.1. Adjustment of frequency of rotation of start-up of the engine

PERFORMANCE ORDER
1. To start and warm up the engine.
2. To kill the engine.
3. To connect a control tachometer to the engine.
4. To turn the lever (2) so that the butterfly valve completely opened (the 1-restrictive screw of a butterfly valve).
5. To start the engine, without pressing an accelerator pedal.
6. To check the frequency of rotation of the engine. It has to be within (3600±200) min.-1.
7. If it is necessary, to adjust rotation frequency, turning the restrictive screw.