Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   + 6.1. Power supply system of carburetor engines
   + 6.2. A power supply system of engines with fuel injection
   - 6.3. Power supply system of the diesel engine
      6.3.1. Fuel supply check
      6.3.2. Pumping of a power supply system
      6.3.3. Adjustment of a cable of supply of fuel
      6.3.4. Adjustment of a connecting lath
      6.3.5. Check and adjustment of frequency of rotation of idling
      6.3.6. Check and adjustment of the maximum frequency of rotation
      6.3.7. Replacement of nozzles
      6.3.8. Sediment plums from the fuel filter
      6.3.9. Replacement of the fuel filter
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


order cialis 20mg online где купить детскую одежду

6.3.3. Adjustment of a cable of supply of fuel

GENERAL INFORMATION

Drive of an accelerator of the diesel engine

1 – overlay of a pedal;
2 – accelerator pedal;
3 – pedal bearing;
4 – cable tip;
5 – fuel supply cable;
6 – cable cover;
7 – arm of fastening of a cable;
8 – cam;
9 – blooming bracket;
10 – bolt;
11 – washer;
12 – intermediate lever;
13 – nut;
14 – nut of fastening of an arm;
15 – roller arm;
16 – roller;
17 – lath drive lever;
18 – lath

Prevention

It is necessary to consider that a cable very fragile therefore during the work with it it is necessary to observe extra care and not to bend it. The cable which was exposed to excesses it is necessary to replace.


PERFORMANCE ORDER
1. To press against the stop a pedal of an accelerator and to record it in this situation.
2. To take out a lock bracket (it is noted by an arrow), to pull a cable so that the TNVD lever concerned the limiter, and to insert a lock bracket into the groove, next to an arm, on a cable tip.