Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
- 6. Power supply system
   + 6.1. Power supply system of carburetor engines
   + 6.2. A power supply system of engines with fuel injection
   - 6.3. Power supply system of the diesel engine
      6.3.1. Fuel supply check
      6.3.2. Pumping of a power supply system
      6.3.3. Adjustment of a cable of supply of fuel
      6.3.4. Adjustment of a connecting lath
      6.3.5. Check and adjustment of frequency of rotation of idling
      6.3.6. Check and adjustment of the maximum frequency of rotation
      6.3.7. Replacement of nozzles
      6.3.8. Sediment plums from the fuel filter
      6.3.9. Replacement of the fuel filter
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










6.3.8. Sediment plums from the fuel filter

GENERAL INFORMATION

Through each 15 000 km it is necessary to merge a sediment from the fuel filter.

PERFORMANCE ORDER
1. To turn off on some turns a stopper (it is shown by an arrow) for removal of air from the filter.
2. To turn off from below the filter a stopper (it is shown by an arrow) and to merge a sediment from the fuel filter.
3. To wrap traffic jams and to tighten their moment 10 N · m (1,0 kgfs · м).
4. To check tightness of fuel system, having started the engine and having allowed it to work idling. After increase in supply of fuel it has to arrive through a transparent hose without vials of air.