Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical drive of switching off of coupling
   + 7.3. Hydraulic drive
   - 7.4. Transmission
      + 7.4.1. Four-speed transmission of type 014
      - 7.4.2. Five-speed transmission of type 013 or 093
         7.4.2.1. Removal and installation of a transmission
         7.4.2.2. Dismantling of a transmission
         7.4.2.3. Dismantling and assembly of primary shaft
         7.4.2.4. Dismantling and assembly of a secondary shaft
         7.4.2.5. Dismantling and assembly of differential
         7.4.2.6. Assembly of a transmission
         7.4.2.7. Adjustment of the mechanism of management of gear shifting
      + 7.4.3. Five-speed transmission of types 016 and 012
      + 7.4.4. Mechanism of management of gear shifting of KP of 016 type
      + 7.4.5. Automatic transmission
   + 7.5. Drive of forward wheels
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


7.4.2. Five-speed transmission of type 013 or 093

7.4.2.1. Removal and installation of a transmission

GENERAL INFORMATION

Transmission of type 013

1 – bolt;
2 – half shaft flange;
3 – bolt;
4 – differential box cover;
5 – differential;
6 – stopper of a drain opening;
7 – stopper of a jellied opening;
8 – coupling case;
9 – switch of light of a backing;
10 – laying;
11 – pin;
12 – transmission case;
13 – bolt;
14 – plug;
15 – washer;
16 – internal ring of the bearing;
17 – needle bearing of the 5th transfer;
18 – a gear wheel of the 5th transfer with the synchronizer;
19 – pin;
20 – fork of inclusion of the 5th transfer;
21 – the blocking ring of the synchronizer of the 5th transfer;
22 – a nave with a gear wreath;
23 – laying;
24 – transmission cover;
25 – washer;
26 – bolt;
27 – cap;
28 – bolt;
29 – washer;
30 – switch of transfers;
31 – pin;
32 – lead;
33 – nut;
34 – gear wheel of the 5th transfer;
35 – rod of a fork of switching of the 3rd and 4th transfers;
36 – axis of an intermediate gear wheel of a backing;
37 – pin;
38 – internal ring of the bearing;
39 – secondary shaft;
40 – gear wheel;
41 – rod of a fork of switching of the 1st and 2nd transfers;
42 – fork of switching of the 1st and 2nd transfers;
43 – fork of switching of the 3rd and 4th transfers;
44 – pin;
45 – intermediate gear wheel of a backing;
46 – primary shaft

Removal and installation of a 5-staged transmission of types 013 and 093 are carried out similar to removal and installation of a 4-staged transmission of type 014 (see subsection 7.4.1.1).