Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. Mechanical drive of switching off of coupling
   + 7.3. Hydraulic drive
   - 7.4. Transmission
      + 7.4.1. Four-speed transmission of type 014
      + 7.4.2. Five-speed transmission of type 013 or 093
      + 7.4.3. Five-speed transmission of types 016 and 012
      + 7.4.4. Mechanism of management of gear shifting of KP of 016 type
      - 7.4.5. Automatic transmission
         7.4.5.1. Removal and installation of a transmission
         7.4.5.2. Mechanism of management of switching of a transmission
         7.4.5.3. Electromagnetic switch of blocking of the lever of the selector
   + 7.5. Drive of forward wheels
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment







buy viagra pills 100 mg online


7.4.5.3. Electromagnetic switch of blocking of the lever of the selector

GENERAL INFORMATION

The mechanism of management of switching of a transmission of cars of release since August, 1988.

1 – selector lever handle;
2 – casing;
3 – protective cover;
4 – selector lever block;
5 – electromagnetic switch of blocking of the lever of the selector;
6 – spring;
7 – plug;
8 – selector lever;
9 – spring;
10 – axis of the intermediate lever;
11 – intermediate lever;
12 – plug;
13 – selector cable sealant;
14 – mechanism case;
15 – cable;
16 – cable arm

Check

PERFORMANCE ORDER
1. To unscrew the handle of 1 lever of the selector.
2. To turn off bolts of fastening and to remove a casing 2.
3. To remove a protective cover 3.
4. To install the selector lever 8 in the situation "R".
5. To check by means of the flat probe 2 and if necessary to adjust a gap between contact of the electromagnetic switch of blocking of the lever of the selector 3 and the lever of 1 selector which has to be equal to 1 mm.
6. To establish a protective cover 3.
7. To establish a casing 2 and to wrap bolts of its fastening.
8. To screw the handle 1 on the selector lever.