Audi 100

1982-1990 of release

Repair and operation of the car



Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
- 9. Steering
   9.1. Technical characteristics
   9.2. Steering wheel
   + 9.3. Steering column
   9.4. Steering mechanism
   9.5. Adjustment of the mechanism of a steering
   9.6. Steering draft
   9.7. Pump of the hydraulic booster of a steering
   9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering
   9.9. Pumping of system of the hydraulic booster of a steering
   9.10. Driving belt of the pump of the hydraulic booster
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


9.1. Technical characteristics
GENERAL INFORMATION

Type of the steering mechanism
gear wheel lath
Transfer relation of the mechanism of a steering:
  – without hydraulic booster
24,80:1
  – with the hydraulic booster
18,70:1
Number of turns of a steering wheel from an emphasis against the stop:
  – without hydraulic booster
4,7
  – with the hydraulic booster
3,5
The smallest radius of turn of the car on an axis of a trace of an external forward wheel, m:
  – without hydraulic booster
10,80 ± 0,50
  – with the hydraulic booster
11,95 ± 0,53
Steering column
safety power absorbing,
it is equipped with the anti-theft device,
integrated with the ignition lock
Capacity of hydraulic system of a steering, l:
  – without system of stabilization of a body
1,6
  – with system of stabilization of a body
2,7
Pressure of forcing of the pump of the hydraulic booster during the operation of the engine idling, kPa (kgf/cm2)
14 500 – 15 500
(145 – 155)
Size of a driving belt of the pump of the hydraulic booster of a steering, mm:
  – Gates 62 08 MC or Continental 533 (4-cylinder engines)
9,50 x 730,00
  – Gates 64 68 MC or Continental 1994 (5-cylinder engines)
9,50 x 730,00