Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   + 10.13. Parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment










10.12. Pressure regulator

Check

PERFORMANCE ORDER
For check of operability of the regulator of pressure to press and sharply to release a brake pedal (the car thus has to stand on wheels). The assistant has to watch the regulator of pressure (2) at this time. If the lever of the regulator (1) does not move, the regulator is faulty and is subject to replacement (3 – a spring; 4 – nut; 5 – roller).

Adjustment

PERFORMANCE ORDER
1. If necessary to add liquid or to pump over brake system.
2. To raise and establish back part of the car on a support so that the back suspension bracket was completely unloaded.
3. To move the lever towards back part of the car against the stop and to weaken an inhaling of a nut of fastening of a spring.
4. To establish a roller so that the spring was not tense and in too time did not sag. After that to tighten a nut the moment of 25 N · m (2,5 kgfs · м).