Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   + 10.13. Parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment










10.9. Brake drum

GENERAL INFORMATION

The brake drum is assembled with a nave of a wheel and actually they are one detail. Removal and installation of the brake drum see in subsection 8.2.3.

Survey and troubleshooting

PERFORMANCE ORDER
1. Carefully to clear the brake drum.
2. To measure by a caliper diameter of a working surface of a drum. The most admissible diameter of a drum is 231 mm. If diameter of more admissible, a drum has to be replaced. In the presence risok the drum can be chiseled, but taking into account that its final diameter of a working surface was no more admissible.
3. The most admissible radial beating of a drum measured on a working surface, 0,1 mm, and minimum admissible axial beating of 0,2 mm.