Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and installation of a cowl
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement lokarya
   11.6. Forward wing
   11.7. Replacement of a molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and installation of a door
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation of a window regulator with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of the reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and installation of a heater
+ 12. Electric equipment


11.21. Removal and installation of the lock of a cover of a luggage compartment

PERFORMANCE ORDER
1. To open a cover of a luggage compartment.
2. To turn off nuts of fastening and to remove the lock with laying from hairpins.
3. To disconnect draft from the lock lever, having wrung out the spring holder.
4. To disconnect the holder from a trunk lid.
5. To disconnect draft from the cylinder case lever.
6. To remove a decorative ring.
7. To turn off two bolts of fastening and to remove the lock switch case with the cylinder.
8. For replacement of the cylinder of the lock it is necessary to take out a pin, to remove a washer and to take out the cylinder with the inserted key, the case of the cylinder and a spring from the lock switch case.
9. To put the lock upside-down.
10. To adjust the lock movement of a latch at the weakened bolts.