Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and installation of a cowl
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement lokarya
   11.6. Forward wing
   11.7. Replacement of a molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and installation of a door
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation of a window regulator with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of the reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and installation of a heater
+ 12. Electric equipment


11.23. Removal and installation of the central console

GENERAL INFORMATION

Removal of a cover of the central console (release model till December, 1987)

1 – screw;

2 – cover;

3 – central console

Removal of a frame of the central console (release model till December, 1987)

1 – screw;

2 – frame;

3 – casing

Removal of the central console (release model till December, 1987)

1 – screw;

2 – central console

Removal of the central console (release model since January, 1988)

1 – clip;

2 – screw;

3 – lateral forward upholstery of the console;

4 – lateral back upholstery of the console

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the battery.
2. To unscrew the gear shifting lever handle.
Release models till January, 1988.
3. To unscrew the screw of fastening and to remove a casing up, previously having shifted a little back.
4. To take out an ashtray.
5. To turn out four screws of fastening and to remove a decorative overlay of the console, having disconnected from the top latch.
6. To remove a decorative overlay of the control panel a heater.
7. To turn out four screws of forward fastening of the console.
8. To remove the central console, having disconnected if necessary from it wires.
9. To install the central console upside-down.
Release models since January, 1988.
10. To disconnect a casing of the lever of gear shifting and to take out up.
11. To delay four clamps in the parties and to take out an ashtray.
12. To turn out on two screws of fastening and to take out lateral forward upholsteries of the console up, previously having exempted them from clamps.
13. To turn out on two screws of fastening and to take out lateral back upholsteries of the console up, previously having exempted them from clamps.
14. To turn off bolts of fastening of the console.
15. To remove the central console, having disconnected if necessary from it wires.
16. To install the central console upside-down.