Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
- 11. Body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and installation of a cowl
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement lokarya
   11.6. Forward wing
   11.7. Replacement of a molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (release cars till December, 1987)
   11.10. Replacement of glass of a door and window regulator
   11.11. Removal and installation of a door
   11.12. External handle of a door
   11.13. Door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation of a window regulator with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of the reflecting element of an external rear-view mirror
   11.18. Repair of a tokoobogrevatelny element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage compartment
   11.21. Removal and installation of the lock of a cover of a luggage compartment
   11.22. Replacement of a back decorative slip with a niche under registration plate
   11.23. Removal and installation of the central console
   11.24. Cleaning of drains (on the models equipped with the hatch)
   11.25. Removal and installation of a heater
+ 12. Electric equipment










11.25. Removal and installation of a heater

GENERAL INFORMATION

System of heating and ventilation
1 – lower air duct;
2 – air supply adjustment mechanism;
3 – fan;
4 – air supply air duct;
5 – cable;
6 – connecting cuff;
7 – back air duct

Levers of gates of a heater

1 – the lever of the gate regulating
air supply;
2 – radiator gate lever;
3 – lever of the gate of adjustment of temperature;
4 – lever of the gate of the lower air duct;
5 – lever of the gate of lateral air ducts

Heater fan

1 – ventilating tube of the engine;

2 – lock ring;

3 – washer;

4 – figured washer;

5 – heater case

Heater

1 – casing;
2 – the electric motor with a krylchatka of the fan;
3 – radiator;
4 – hose of removal of air;
5 – plate

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the battery.
2. To merge liquid from the cooling system (see subsection 4.1).
3. To remove levers of a screen wiper and a cover of the water taking away casing.
4. To disconnect a cable from the air supply air duct gate lever.
5. To disconnect a cable from the heater radiator gate lever.
6. To disconnect a cable from the lever of the gate of the lower air duct under the dashboard.
7. To disconnect from a block heater with wires.
8. To disconnect air ducts from a heater.
9. To weaken collars and to disconnect hoses from a heater radiator.
10. To remove a heater.
11. Rotating the jack handle clockwise, raise the car so that the wheel came off the earth. Completely unscrew bolts of fastening of a wheel and remove a wheel.

Removal and installation of the electric motor of a heater

PERFORMANCE ORDER
1. To disconnect a wire from the "minus" plug of the battery.
2. To remove levers of a screen wiper and a cover of the water taking away casing.
3. To disconnect a cable from the air supply air duct gate lever.
4. To turn out screws of fastening and to remove an air supply air duct.
5. To disconnect a block with wires from the opposite side.
6. To remove a lock ring. Then to remove washers.
7. To take out the electric motor with a krylchatka of the fan.
8. To install the heater electric motor upside-down.