1. To mark the screen definitely, thus to put the line of the centers of headlights of M on the screen at distance h equal to height of an arrangement of the centers of headlights over floor level. The distance of h needs to be measured on the equipped car with the additional weight equal to 70 kg, on the middle of a back seat. The fuel tank has to be filled. |
2. The distance X from the center headlights to the middle of the car is measured on the car. |
3. To check and if necessary to finish to rated pressure in tires. |
4. To install the car on a horizontal platform perpendicular to the screen at distance of 10 m. Thus the longitudinal plane of symmetry of the car has to pass across the line 0 on the screen. |
5. On models with the electroproofreader of light of headlights to install the proofreader's handle in the situation "0". |
6. To turn on a passing beam. |
7. To regulate the direction of a light spot for each headlight separately. To close other headlight during adjustment opaque material. |
|
8. To extend up the button of blocking (1) located on a headlight. |
9. To adjust screws (in horizontal and in the vertical plane) manual adjustment of a beam of light the provision of a light spot for each headlight on the screen, if an arrangement of light spots to the necessary. |
10. Headlights are considered adjusted when the upper bounds of the left parts of light spots coincide with the line N, and vertical lines A and B pass through points of C1 and C2 of crossing of horizontal and inclined sites of light spots. |