1982-1990 of release
Repair and operation of the car
- 1.1. Governing bodies and devices
+ 1.1.1. Release models till January, 1988
+ 1.1.2. Release models since January, 1988
1.2. Window regulators with the electric drive
1.3. An external rear-view mirror with the electric drive
1.4. Internal rear-view mirror
1.6. Forward seats with mechanical adjustment
1.7. Forward seats with the electric drive
1.8. Transportation of lengthy subjects
+ 1.9. Start of the engine
1.10. Precautionary measures at an engine stop
1.11. Cruise control
1.12. Heating and ventilation
1.13. Control panel conditioner
1.14. On-board computer
1.15. Control of the on-board computer on release models till January, 1988.
1.16. Blocking of the internal handle of the lock of a back door
1.17. Car running in
1.18. Check of the car before departure
1.19. Replacement of operational liquids and lubricants
+ 1.20. Servicing of cars of release till August, 1985.
+ 1.21. Servicing of cars of release since August, 1985.
1.22. Frequency of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
generic for viagra
For switching of functions to press the top part of a key 1 (see rice. Command keys the on-board computer on release models till January, 1988). Thus the indicator 1 (see rice. The display of the on-board computer on release models till January, 1988) will show the chosen function. By each pressing of a key the function following one after another joins. When pressing the lower part of a key 1 (see rice. Command keys the on-board computer on release models till January, 1988) join an electronic clock. When pressing a key of 2 Reset during more than 2 with there is a zeroing of data of the chosen function in "memory" of the computer.
Functions of the computer
Functions of the computer are similar to functions of the computer on release models since January, 1988 except that instead of the "amount of the spent fuel" function the "electronic clock" function is established.
Shows the current time. For inclusion of this function to press the lower part of a key 1 (see rice. Command keys the on-board computer on release models till January, 1988). At ignition switching off the computer automatically switches to this function with any other which is restored at the subsequent inclusion of ignition. For time conversion to press the lower part of a key 1 and to hold it until indication of minutes starts blinking. Then to press a key of 2 Reset for the translation of minutes. By each short-term pressing there is a transfer for one minute. If to hold a key of 2 Reset in the pressed state, transfer of minutes happens quicker. Again to press the lower part of a key 1 and to hold it until indication of hours starts blinking. To put clock similarly to minutes. After time conversion to press the top part of a key 1.