Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
- 1.1. Governing bodies and devices
   + 1.1.1. Release models till January, 1988
   + 1.1.2. Release models since January, 1988
   1.2. Window regulators with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. Internal rear-view mirror
   1.5. Cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Start of the engine
   1.10. Precautionary measures at an engine stop
   1.11. Cruise control
   1.12. Heating and ventilation
   1.13. Control panel conditioner
   1.14. On-board computer
   1.15. Control of the on-board computer on release models till January, 1988.
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Car running in
   1.18. Check of the car before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985.
   + 1.21. Servicing of cars of release since August, 1985.
   1.22. Frequency of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


1.3. An external rear-view mirror with the electric drive

GENERAL INFORMATION

The control panel an external rear-view mirror with the electric drive

1 – joystick of management of the left mirror;

2 – joystick of management of the right mirror;

I, II, III, IV – provisions of the joystick

Joysticks of management of external mirrors are installed on an armrest of a door of the driver.

The joystick 1 operates the left mirror, and the joystick 2 – right.

When moving the joystick in the direction:

I – the reflecting element turns to the left;
II – the reflecting element turns up;
III – the reflecting element turns to the right;
IV – the reflecting element turns down.


Prevention

At failure of the electric drive the provision of the reflecting element can be adjusted manually, carefully pressing on edge of an element.









QX4.ONLINE
S40.ONLINE
A-8.ONLINE
W124.ONLINE
RX300.ONLINE
W140.ONLINE
B3-B4.SPACE
B3B4.SPACE
A-8.SPACE