Audi 100

1982-1990 of release

Repair and operation of the car



Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
- 10. Brake system
   10.1. Technical characteristics
   10.2. Adjustment of provision of a pedal of a brake
   10.3. Main cylinder of a brake
   10.4. Brake mechanism of a forward wheel of the Teves brand
   10.5. Brake mechanism of a forward wheel of the GIRLING brand
   10.6. Brake disk
   10.7. Case of a bracket and piston
   10.8. Drum brake mechanism of a back wheel
   10.9. Brake drum
   10.10. Wheel brake cylinder
   10.11. Disk brake mechanism of a back wheel
   10.12. Pressure regulator
   - 10.13. Parking brake
      10.13.1. Adjustment of the parking brake
   10.14. Anti-blocking system of brakes (ABS)
   10.15. Pumping of brake system
+ 11. Body
+ 12. Electric equipment


10.13.1. Adjustment of the parking brake

MODELS WITH BACK DRUM BRAKE MECHANISMS

PERFORMANCE ORDER
1. To check installation of the lever of the parking brake which has to be in extreme lower situation. To raise and establish back part of the car on a support.
2. To weaken a tension of cables (see rice. The parking brake), having turned off an adjusting nut of the equalizer until the end of a carving.
3. Once sharply to squeeze out and release a pedal of a brake and to lift the lever of the parking brake on three clicks.
4. To wrap an adjusting nut of the equalizer until still back wheels can be turned a hand.
5. To install the lever of the parking brake in extreme lower situation. Back wheels have to rotate thus freely.

MODELS WITH BACK DISK BRAKE MECHANISMS

PERFORMANCE ORDER
1. To press several times a brake pedal.
2. To establish basic whetstones under forward wheels.
3. To raise and establish back part of the car on a support.
4. To check installation of the lever of the parking brake which has to be in extreme lower situation.
5. To tighten an adjusting nut of the equalizer until when both levers (1) start departing from an emphasis (2).
6. To turn off an adjusting nut on two turns.
7. Whether to check cables are drawn. For this purpose to wring out a screw-driver (1) one lever (2) against the stop. If thus the second lever departed from an emphasis, means cables are drawn. To weaken an adjusting nut so that the opposite lever did not depart from an emphasis.
8. To check operation of the parking brake. At extreme lower position of the lever of the parking brake back wheels have to rotate freely.