Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
- 1.1. Governing bodies and devices
   + 1.1.1. Release models till January, 1988
   + 1.1.2. Release models since January, 1988
   1.2. Window regulators with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. Internal rear-view mirror
   1.5. Cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Start of the engine
   1.10. Precautionary measures at an engine stop
   1.11. Cruise control
   1.12. Heating and ventilation
   1.13. Control panel conditioner
   1.14. On-board computer
   1.15. Control of the on-board computer on release models till January, 1988.
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Car running in
   1.18. Check of the car before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985.
   - 1.21. Servicing of cars of release since August, 1985.
      1.21.1. Maintenance of the engine
      1.21.2. Transmission maintenance
      1.21.3. Maintenance of a running gear
      1.21.4. Maintenance of a steering
      1.21.5. Maintenance of brake system
      1.21.6. Maintenance of electric equipment
      1.21.7. Maintenance of a body
   1.22. Frequency of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment










1.21.2. Transmission maintenance

GENERAL INFORMATION

Through each 30 000 km of run it is necessary:

1. To check tightness of a transmission. If oil leaks on the socket of cases of a transmission, to tighten fastening bolts.

2. To check oil level in a transmission and if necessary to add to norm. In an automatic transmission to check oil level also in a case of the main transfer.

Through each 60 000 km of run it is necessary to perform all works what need to be carried out after 30 000 km of run, and, besides, to replace oil in an automatic transmission, and also in a case of the main transfer. Thus to wash out an oil case, the mesh filter and to replace laying of an oil case.

Once a year it is necessary:

1. To check tightness of a hydraulic actuator of coupling. At detection of dribble of brake fluid to tighten collars of fastening of a hose and a nut of fastening of tubes. If on a hose there are cracks, anguishes or rubber lost elasticity, a hose to replace;

2. To check a condition of protective covers of CV JOINTS. To replace the torn covers.