Audi 100

1982-1990 of release

Repair and operation of the car

Audi 100
- 1.1. Governing bodies and devices
   + 1.1.1. Release models till January, 1988
   + 1.1.2. Release models since January, 1988
   1.2. Window regulators with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. Internal rear-view mirror
   1.5. Cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   - 1.9. Start of the engine
      1.9.1. Carburetor engine
      1.9.2. The engine with system of injection of fuel
      1.9.3. Diesel engine
   1.10. Precautionary measures at an engine stop
   1.11. Cruise control
   1.12. Heating and ventilation
   1.13. Control panel conditioner
   1.14. On-board computer
   1.15. Control of the on-board computer on release models till January, 1988.
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Car running in
   1.18. Check of the car before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985.
   + 1.21. Servicing of cars of release since August, 1985.
   1.22. Frequency of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

1.9.3. Diesel engine

1. To include ignition. Thus food on glow plugs moves and on the dashboard the control lamp lights up. The control lamp dies away as soon as glow plugs get warm up to the working temperature. Only after that it is possible to include a starter.
2. To include a starter, without pressing an accelerator pedal. At engines with a turbo-supercharging at a temperature of air below 0 °C at start-up it is necessary to press an accelerator pedal slightly.
3. To scroll the engine a starter until it does not start working evenly (but no more than 20 c).
4. If the cold engine was not launched, before repeated start-up it is necessary to warm up again glow plugs (the control lamp burns). If candles are heated-up (the control lamp does not burn), the engine can be started at once.
5. If at start-up of the cold engine its considerable vibration, as turn of the handle 16 (see rice is felt. The dashboard of models of release till January, 1988) the regulator of frequency of rotation to achieve equal operation of the engine.