Audi 100
1982-1990 of release
Repair and operation of the car
Audi 100
+
1.1. Governing bodies and devices
+
2. Technical characteristics
-
3. Engines
+
3.1. Four-cylinder engines
-
3.2. Five-cylinder engines
3.2.1. Removal and installation of the engine
-
3.2.2. Dismantling and assembly of the engine
3.2.2.1. Removal and installation of a head of the block of cylinders
3.2.2.2. Adjustment and tension of a belt of the drive of a camshaft
3.2.2.3. Survey, troubleshooting and repair of details of a head of the block
3.2.2.4. Removal of a camshaft and pushers of valves
3.2.2.5. Installation of a camshaft and pushers of valves
3.2.2.6. Removal and installation of valves
3.2.2.7. Dismantling and assembly of the drive of a camshaft
3.2.2.8. Removal and installation of a flywheel
3.2.2.9. Removal and installation of an oil case
3.2.2.10. Removal, check and installation of the oil pump
3.2.2.11. Replacement of epiploons of a cranked shaft
3.2.2.12. Cranked shaft and shatunno-piston group
+
3.3. Diesel engine
+
4. Cooling system
+
5. Exhaust system
+
6. Power supply system
+
7. Transmission
+
8. Running gear
+
9. Steering
+
10. Brake system
+
11. Body
+
12. Electric equipment
3.2.2.11. Replacement of epiploons of a cranked shaft
PERFORMANCE ORDER
1.
An epiploon 16 (see rice.
A flywheel, a cranked shaft, the oil pump
)
remove the special adaptation. In the absence of the adaptation to remove the oil pump and to take out from it an epiploon (see
subitem 1-9 of subsection 3.2.2.10
).
2.
To establish a new epiploon (see
the item 11 of subsection 3.2.2.10
).