Audi 100

1982-1990 of release

Repair and operation of the car




Audi 100
+ 1.1. Governing bodies and devices
+ 2. Technical characteristics
- 3. Engines
   + 3.1. Four-cylinder engines
   - 3.2. Five-cylinder engines
      3.2.1. Removal and installation of the engine
      - 3.2.2. Dismantling and assembly of the engine
         3.2.2.1. Removal and installation of a head of the block of cylinders
         3.2.2.2. Adjustment and tension of a belt of the drive of a camshaft
         3.2.2.3. Survey, troubleshooting and repair of details of a head of the block
         3.2.2.4. Removal of a camshaft and pushers of valves
         3.2.2.5. Installation of a camshaft and pushers of valves
         3.2.2.6. Removal and installation of valves
         3.2.2.7. Dismantling and assembly of the drive of a camshaft
         3.2.2.8. Removal and installation of a flywheel
         3.2.2.9. Removal and installation of an oil case
         3.2.2.10. Removal, check and installation of the oil pump
         3.2.2.11. Replacement of epiploons of a cranked shaft
         3.2.2.12. Cranked shaft and shatunno-piston group
   + 3.3. Diesel engine
+ 4. Cooling system
+ 5. Exhaust system
+ 6. Power supply system
+ 7. Transmission
+ 8. Running gear
+ 9. Steering
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


Частота - 12 15 МГц офтальмологические сканеры.

3.2.2.2. Adjustment and tension of a belt of the drive of a camshaft

GENERAL INFORMATION

Adjustment and check of a tension of a belt of the drive of a camshaft

1 – natyazhitel of a belt of the drive of a camshaft;

2, 3 – wrenches;

4 – camshaft cogwheel;

5 – camshaft drive belt;

6 – cogwheel of an intermediate shaft

PERFORMANCE ORDER
1. To turn the water pump counterclockwise, previously having pulled a belt that it did not come off cogwheels. An assembly shovel or a screw-driver to turn the water pump counterclockwise, having pulled a belt. To tighten bolts of fastening of the water pump.
2. To check a belt tension. The belt has to be overwound no more than on 90 ° by effort of big and index fingers.
3. Finally to tighten bolts of fastening of the water pump the moment of 20 N · m (2,0 kgfs · м).